Try the opening in both directions
The practice board starts with 16 on the marked finish square at B3. Columns run from A to E from left to right. Rows start at 1 at the top. For C3 → D3, select C3 first, then D3. The resulting 8 stays on D3.
- Play C3 → D3. The 5 at C4 loses its only numbered neighbor. Its other neighbors are two modifiers and an empty square.
- Play E1 → D1. The two 1s still merge into 2, so this position can look playable for a while. C4 is already stranded.
- Press Undo twice to restore the opening board. Now play D3 → C3. The 8 stays on C3 and touches both C4 and the finish square.
Before you merge a pair, picture the square you are about to clear. Check whether the numbered tiles near that square can still reach the finish through a chain of side-touching numbers. The values along that chain can differ. A modifier can change a neighbor's value, and its square empties when you use it. An empty square stays empty through later merges. Once separate groups of numbers lose their connection, each group will keep at least one tile.
Build a 16 beside the finish
With 8 on C3, use the upper corner to build another 8. Give each result a place to land on the next turn.
- E1 → D1 leaves 2 on D1, next to the 2 on C1.
- D1 → C1 leaves 4 on C1, next to the 4 on C2.
- C1 → C2 leaves 8 on C2.
- C2 → C3 leaves 16 on C3.
The finish square at B3 can only receive a tile. Its value can grow, and its position stays fixed for the entire puzzle. You now have two adjacent 16s. Try C3 → B3 to see why the timing matters. B3 grows to 32, and C4 loses its only numbered neighbor. Press Undo once. Keep the 16 on C3 until a second 16 can come up from C4.
Preserve the finish value until you have a match
At this point, +3 at B4 and ×2 at D4 both touch the 5 at C4. The +3 also touches the marked 16 at B3. Try B4 → B3 to see what happens when you change the finish value early. The 19 on the mark now needs an equal 19. The left branch still contains 4s, and the remaining double can only turn the 5 into 10. Undo the addition to restore the 16 on B3.
Work backward from the 16 you need at C4. If the double comes last, the value before it must be 8. The +3 is exactly enough to raise the starting 5 to 8.
- B4 → C4 makes 8 from 5 + 3.
- D4 → C4 makes 16 from 8 × 2.
- C4 → C3 joins the two 16s at C3 and leaves a 32 beside the finish.
The finished branch now waits at C3. On boards where two branches meet at a marked square, check the order they should arrive in. The current 16 on B3 can receive the left branch’s next 16. After that it will match the 32 you just built. Try different operation orders on the 5×5 lesson when you want to focus on the wildcard arithmetic.
Bring the left branch into B3
The right side now has 32 on C3. Bring in a 16 from the left side first so the finish square can reach 32.
- A5 → A4 leaves 8 on A4.
- A2 → A3 leaves 8 on A3.
- A4 → A3 leaves 16 next to B3.
- A3 → B3 raises the finish value from 16 to 32.
- C3 → B3 finishes on 64 after 13 moves from the original position.
For a second route, restart and play the first four moves in this section before you touch D3. Then build the right side as before. A3 can go into B3 early because it is the last tile in the left branch. C3 stays in place to receive C4. Finish with C3 → B3 as soon as both squares hold 32.
Use the solver to check where a route failed
To compare the opening positions, choose 5×5 under Board size in the Sumbreak solver. Enter this starting grid and set Finish square to B3. Leave the dashes blank. You can type x2 for ×2.
| Row | A | B | C | D | E |
|---|---|---|---|---|---|
| 1 | — | — | 2 | 1 | 1 |
| 2 | 4 | — | 4 | — | — |
| 3 | 4 | 16 | 4 | 4 | — |
| 4 | 4 | +3 | 5 | ×2 | — |
| 5 | 4 | — | — | — | — |
- Choose Find solution. Use Next step to watch where the results land. You may see a different valid order from the route above.
- In the input grid, clear C3 and change D3 to 8. Keep B3 as the finish. Run the search again. The solver reports that this position has no solution.
- Test the other direction from the same starting grid. Enter 8 at C3 and clear D3. The solver can finish from here.
If the solver finds no route from your own board, use Undo on the game board one move at a time. Recheck the position before each move until the solver finds a route. Compare the first step it shows with the move you played there. If the search reaches its limit, try entering a later position you can already reach.
Practice one decision on a fresh board
- On a 4×4 practice board, find an equal pair that can merge in either direction. Check which square you need for the next match before you clear either one.
- On a 5×5 practice board, look at the legal targets for one modifier. Calculate the new value for each and name the neighbor you want to match.
- On a 6×6 practice board, trace how the outer groups reach the finish. When two groups rely on the same connecting square, use it to collect the farther tiles before you clear it.