Sumbreak

Sumbreak 5×5 practice

Turn the 5 on B3 into a 16. The +3 and ×2 tiles can both reach it, and the order decides which number you get.

Finish on the marked square
5×5 practice 12 tiles left

Tap two matching neighbors or drag one onto the other.

Start with the number you need

The finish square at C3 holds 16. Its neighbor at B3 holds 5. Before moving a wildcard, work backward from that 16. Doubling an 8 gives 16, and adding 3 to the starting 5 gives 8. Move +3 from A3 onto B3, then move ×2 from B2 onto B3. Both modifiers disappear after use and the result stays at B3, where it can reach the finish.

There is a second tempting destination for +3. A4 starts at 4 and shares an edge with A3. Spending +3 there makes 7 and leaves B3 at 5. Undo that move if you need to put the addition back next to the 5. Use the number you want to produce and the square it needs to survive on as a pair of checks.

Turn the lower row into one 32

After the two wildcard moves, leave B3 alone for a moment. The bottom half starts with eight 4s. Build four 8s first, with each result in row 4. That row connects the small pairs to C4, the square below the finish.

Move the earlier 16 from B3 onto C3 to make 32 at the finish. The 32 in C4 can now move into it. Building the lower result at D4 or E4 would put it out of reach of the finish, because an empty square cannot receive a tile.

Check a wildcard before you spend it

Order on B3 First result Second result What you can merge next
+3, then ×2 8 16 The 16 at C3 matches.
×2, then +3 10 13 The lower rows can make powers of two. They cannot supply a matching 13.

Look at each numbered neighbor of a wildcard. Calculate both the value you would get and the value that square would need to meet next. A wildcard can turn an unmatched number into a pair, or take an active pair out of play too early. For example, doubling a 4 makes 8, so any 4 it was about to merge with needs a different route. Use Undo while the decision is still recent.

An addition changes the total of the board by the amount printed on the tile. A double adds as much as the number you apply it to. In this example, +3 acts on 5 and ×2 acts on the resulting 8. Those moves contribute 3 and 8 to the final value. The target a fresh 5×5 ends on can depend on where you spend its modifier.

For a smaller look at modifier order, load Early double in the Sumbreak solver. Select New puzzle above when you want another 5×5 with a different set of neighbors to check.